Resource Library

The substrate must be clean, dry and free of dust, grease or other contaminant.

ELASTOCOL STICK H2O may be applied with a paint brush, roller or sprayer on metal, concrete, wood or polystyrene surfaces as well as on gypsum plasterboard.

Average coverage:
0.1 to 0.3 L/m2 (0.25 to 0.75 US gal/100 ft2). Spraying equipment recommendations:

• Spray tip size: between 20 and 25 mils
• Pressure: 1300 psi continuous

Membranes must be installed on the same day as the application of ELASTOCOL STICK H2O.

Minimum application temperature: 5 °C (41 °F) Minimum Application Temperature: 5°C (41°F).

Limitations:
Not suitable for plastic surfaces such as vinyl siding or water repellent-treated panels.Do not use to seal self-adhesive membrane joints, as a primer between two membranes or on asphaltic boards

NOTE:
International Building Components Inc. may modify the composition and/or utilisation of its products without prior notice. Consequently orders will be filled according to the latest specification.